PROMO: is here
Antex installs glass railings in Toronto and across the Greater Toronto Area — on stairs, balconies, decks, porches and pool surrounds. We come out and measure first. Then we send you an itemized price. We do not quote railings over the phone, because the number would be a guess.
Built on trust and quality.
Trusted by Toronto Homeowners & Builders Since 2010






Stairs, balconies, decks, porches, pool surrounds. Frameless, part-framed, framed, post-mounted or channel. We fit glass railings in Toronto homes of every age, from post-war semis to new builds. We measure the opening, order the glass and hardware to those measurements, install, and clean up after ourselves.
Frameless and standoff systems drop the posts and the top rail. On a staircase that pulls daylight through the floor. On a deck or balcony you keep the view you bought the house for.
Your project manager takes the measurements on site, by laser, and stays with your job from the first visit to the last. One person to call. He also does the final check before we hand the railing over.
Weather and the type of job permitting, we keep installing through the winter. If your calendar is tight and ours has room, we will fit you in sooner.






Point At the Railing You Want
Most people know what they like before they know what it is called. Pick a shape, a way of fixing it, a glass and a handrail. We will bring the price to the measurement.
These are the calls we get from Toronto homeowners about other people’s work. Each one has a step in our process attached to it.
Glass cut to the wrong size is the most expensive mistake on a railing job. Your project manager measures every opening himself before we order a thing.
Materials and labour split out, good for two weeks. It moves only if you change the scope or the materials.
One contact, a written timeline where we can give one, and a call the moment a date moves.
Every panel checked for line and spacing. Every fixing tightened before we hand over.
Tarps and plywood over floors, walls and planting. Old railing out, waste gone, dust kept down, small marks patched.
Measured badly, or measured off a drawing. Weeks lost waiting for the replacement panel.
A number over the phone, then extras once the job is open and the deposit is gone.
Slow replies, a start day that drifts, and nobody picking up.
Uneven gaps you cannot unsee, and fittings that back out in the second year.
Scratched floors, trodden planting, and the old railing still lying in the driveway.
From a single staircase to a full condo terrace, Antex designs, fabricates, and installs every type of glass railing in-house — engineered to your span, built for Toronto weather, and finished to pass inspection the first time.
Open up your stairs and pull light through the whole floor. Custom interior panels fitted to your exact rise and run, with clean standoff or channel mounting.
Unobstructed views with a barrier that meets code. Tempered safety glass rated for your balcony's load and height, indoors or out.
Turn a backyard deck into an open-air room. Weather-sealed hardware and tempered glass built to shrug off freeze-thaw and salt.
Our signature look — no posts, no top rail, nothing between you and the view. Point-fixed or base-shoe systems for a seamless modern edge.
For homeowners upgrading stairs, balconies, or backyard decks. We measure, fabricate, and install around your schedule and your finish — clean work, one crew, no mess left behind.
For builders, condos, and property managers. Frameless and post systems for lobbies, mezzanines, and rooftop terraces — spec-matched, code-compliant, and delivered on the timeline your project runs on.
The same path every time. We come out and measure. We send an itemized price. You approve it, and only then do we order. Our supplier makes the glass and the fittings to our measurements. We install, cover your floors and planting while we do it, clear the waste, check the panels, tighten the hardware and walk the job with you. The last 10% comes after that walk, not before.
We price off measurements we took ourselves, not off a phone call.
We do not cut, drill or temper glass, and we do not make fittings. Our suppliers do, to our numbers. We order it, bring it and fit it.
Dust kept down, waste gone, panels checked, care notes handed over, and a walk round with you at the end.
Every panel below is a real Toronto project — measured, fabricated, and installed by the Antex crew. Browse recent glass railing work across homes, decks, condos, and commercial spaces, and picture it on your own.
Clear glass keeps the staircase open while side-mounted hardware leaves the steps visually clean.
Standoff glass
Fascia-mounted
Measure · Fabricate · Install
Modern interiors
A low-profile glass system protects the deck edge without blocking the backyard view.
Standoff glass
Surface-mounted
Design · Supply · Install
Decks and patios
A continuous bottom channel creates a clean glass edge around the balcony.
Frameless channel
Top-mounted
Engineering · Glass · Install
Residential balconies
Transparent perimeter protection keeps the skyline visible from every seating area.
Frameless glass
Perimeter-mounted
Measure · Fabricate · Install
Rooftop terraces
Clear panels define the pool area while preserving an open backyard layout.
Spigot glass
Surface-mounted
Layout · Glass · Hardware
Pools and spas
Glass infill modernizes the entry while structural posts frame the porch steps.
Post & glass
Top-mounted posts
Custom panels · Install
Porches and entries
A polished glass barrier defines the walkway without making the commercial interior feel closed.
Post & glass
Floor-mounted
Coordination · Fabrication · Install
Lobbies and offices
The upper-level guard stays visually light, keeping the full interior connected.
Standoff glass
Edge-mounted
Measure · Custom glass · Install
Lofts and mezzanines
We measure our work by how it holds up — and how our clients feel on handover day. Here's what property owners and builders across the GTA say about working with Antex.
Wonderful experience. Antex team installed our glass shower enclosure and it looks great. Service was fast without sacrificing quality.
Anyone can hang a panel of glass. Antex is different in four ways that show up on your invoice, your calendar, and your final inspection.
We calculate glass thickness, standoff spacing, and load rating for your exact span — then hand you the drawing. Your railing is engineered before it's fabricated.
We calculate glass thickness, standoff spacing, and load rating for your exact span — then hand you the drawing. Your railing is engineered before it's fabricated.
Because we fabricate our own glass and hardware in-house, we control the timeline. We book a firm install date and hold it — no supplier delays passed down to you.
Every Antex install carries a written workmanship warranty. If a fixing loosens or a seal fails, we come back and make it right — no argument.
Our process is built to keep you informed and in control at every stage — from the first measurement to the moment we polish the last panel. No guesswork, no chasing us for updates, no surprises on install day.
Your project manager comes out and laser-measures every opening. One to two business days later you have an itemized estimate, good for two weeks. We order nothing until you say yes.
Glass and fittings are made to the measurements we took. Your project manager gives you a date window and rings you if it shifts.
Floors and planting covered, old railing out, waste gone. Panels checked for line and spacing, hardware tightened, care notes handed over, and a walk round with you. Then the last 10%.
Stairs, a balcony, a deck or a pool surround, anywhere in Toronto or the GTA. We come out, measure it properly, and send you an itemized estimate within two business days. Free, and there is nothing to sign at the door.